Ezviz Husky Air Guide De Démarrage Rapide page 7

- Scan the QR code on the body of the camera.
3
Choose network connection.
- Choose Wi-Fi (2.4GHz
(Recommended)
configure Wi-Fi for the camera.
For wired connection, connect the camera to the router with a network cable.
- Enter the correct time zone and date format.
Hold the RESET button for 10 seconds when camera is running if either adding cameras or
Wi-Fi connection fails.
Wi-Fi Only) or wired connection.
For Wi-Fi connection, enter Wi-Fi name and password to
Network Cable
2
Router
N3
N3