Preparing The Heat Pump For Use / Warmtepomp Klaarmaken Voor Gebruik / Vorbereitung Der Wärmepumpe Zur Inbetriebnahme / Préparation De La Pompe À Chaleur Avant L'utilisation; Typical Configuration & Distance From The Pool / Typische Opstelling & Afstand - Summer Fun SF35 Mode D'emploi

4. Preparing the heat pump for use
4.1. Typical configuration & distance from the pool
The heat pump should be located at least 2m away from the swimming pool. In normal operation, the air taken
by the heat pump is cooled down and water may condens on the fins of the evaporator and run out of the
bottom of the unit.
A free area of minimum 0,3 meter around the heat pump has to be kept clear from any object(1).
Put the heat pump on a flat, solid base.
Do not obstruct the fan, leave at least 1.5m free unobstructed space in front of the fan.
All feeding of water treatment to the pool water has to be done downstream of the heat pump(2)
It is normal for condensation to come out of the heat pump. This is not a leak or fault with the unit. If the
humidity is very high, the condensation could be a number of liters a day.
4.2. Hose connection.
Step 1
It is normal for condensation water to come out of the heat pump when it is operating. This is not a fault or
leak!
4
circulation
pump
(1)
Filter
Summer Fun
Min. 2
Meter
(2)
Step 2