Valentine VBox 60 Guide Rapide page 34

1. Connect the device (only use the supplied power cord)
2. Load the dishes, always starting with the lower level
Note that the heating speed depends significantly on
the type of dishes used.
Never preheat an empty device under full power, risk of burns.
Be sure to take precautionary measures to avoid burns when using maximum
temperature.
In the VBox60, always place dishes at the bottom of the device, as a heating
element is located in the lower part and the bottom becomes very hot if unoccu-
pied. Risk of burns and energy loss!
The unit might generate an unusual smell during the first heating. This is perfectly
normal and disappears after a few operating cycles.
34
Loading the plate warmer