Valentine VBox 60 Guide Rapide page 33

VBox60 : always block the wheels when the device is in use. Make sure that the device is
placed on a flat ground, in a dry environment and allow enough distance between the walls
and any heated surfaces.
If you prefer legs rather than wheels please order a transformation set from Valentine
Fabrique SA or your official dealer.
VBox25 : Make sure that the device is placed on a flat surface and in a dry environment. En-
sure that there is enough distance between the walls and any heated surfaces and that the
base can handle the weight and heat from the device.
Installation of shelves: make sure that the spurs
attached to the shelves are well introduced to the
compartments [A].
Adjusting the door: the door is factory adjusted in
order for it to be as airtight as possible. If further ad-
justments prove necessary, please refer to page 40 of
this manual.
Installation
Remove the protective plastic covers.
Clean the inside of the device with a damp cloth or a
sponge and some soapy water. Dry thoroughly.
Make sure that water does not seep into the
circulation openings of the heating elements!
A
33