Topcom OUTDOOR SPORTSWATCH 2000 Manuel D'utilisateur page 19

14.3 ABSOLUTE PRESSURE CALIBRATION
The Watch can adjust the current pressure reading to an absolute pressure
value.
Before calibrating the Barometer, consult the nearest observatory sta-
tion to get the ambient barometric pressure of your current position.
• Press the [S/S] button in Absolute Pressure Display. The pressure
reading will appear.
• Press the [S/S] or [L/R] button to increase / decrease the number.(
Hold down the button changes the number at a higher speed).
• Hold the [M] button to confirm setting and exit the adjustment display.
14.4 FACTORY DEFAULT CALIBRATION
The Watch can adjust the pressure reading calculation back to using factory
default value.
• Press the [S/S] button in Factory Default Display, and the indicator
"NO" will appear.
• Press the [S/S] or [L/R] button to select between "YES" (reset the
Watch to factory default) or "NO" (abort the resetting).
• To exit Adjustment Display, hold the [M] button for 2 seconds, and
then the Watch will go back to Altimeter Mode.
If "YES" is selected, "DONE" Display will appear for 2 seconds prior to
normal operation.
TOPCOM Outdoor Sportswatch 2000
19