Twin-Star International POWERHEAT 10ILH330-01 Mode D'emploi page 6

OPERATING INSTRUCTIONS
FUNCTION
POWER
HEATER
CANDLELIGHT
DOWNLIGHT
COOL DOWN CYCLE
A501
ICON DESCRIPTION
The POWER button supplies power to all of the functions
of the fireplace. The power button will put the insert in a
standby mode. This will turn off all functions at once but
will hold the settings in the memory. By pressing the
power button again the unit will turn on at the same
settings.
With the power on, press and hold the power button on the
control panel for 10 seconds or until the heater indicator
flashes to disable or re-enable the heater function.
Pressing the HEAT button will turn on / off heat output.
6 light levels can be selected:
Setting 1- 3 decrease in brightness with flickering.
Setting 4-6 decrease in brightness without flickering.
Pressing the DOWNLIGHT button will turn on / off the
downlight.
After the heater has been in use the fan will continue to run
for a COOL DOWN CYCLE period of time to cool down
the internal parts.
6
www.tsicustomerservice.com