Getting To Know Your 12-Piece Rocket Blender Set; Before Using For The First Time; Operating Instructions - Bella 13586 Manuel D'instructions

Getting to Know Your 12-Piece Rocket Blender Set

Product may vary slightly from illustration
Tall Blending Cup
Blending Blade/
Cross Blade
Blending Blade/
Gasket Seal
Blending Blade
Collar
Motor Base
Polarized Plug

Before Using for the First Time

1. Carefully unpack the Rocket Blending Set and remove all packaging materials. Check the contents to
ensure that all parts and accessories are present, and have been received in good condition.
2. Handle the blending blade and the grinding blade attachments by their collars only.
WARNING: Do not touch blades. Blade attachments are very sharp. Use extreme care when handling.
Failure to do so can result in personal injury.
3. Wash all lids in warm, soapy water. Rinse and dry thoroughly.
4. Clean each cup before first use. Fill cup one-quarter full with clean, warm water. Following the steps
outlined in the Operating Instructions, pulse several times using first the blending blade and then the
grinding blade. Rinse thoroughly.
5. The motor base may be wiped with a damp cloth.
WARNING: DO NOT IMMERSE THE MOTOR BASE IN WATER.

Operating Instructions

1. Place the motor base on a flat, clean, dry countertop or table.
2. Make sure the unit is unplugged.
3. The Rocket Blender comes with 2 sizes of processing cups.
Place the food to be processed into the desired cup: tall blending
cup or small grinding cup.
4. To assemble for blending, chopping, or mixing, using the
blade's collar to handle, place the blending (cross) blade into
the tall blending cup.
5. To assemble for grinding or whipping, using the blade's collar to
handle, place the grinding (flat) blade into the small grinding cup.
IMPORTANT: Check to make sure the cup ring is not attached to
the blending cup before assembling the blade. If it is, simply lift
off to remove.
IMPORTANT: In the base of each blade's collar, there is a plastic
gasket seal that creates an airtight fit with the Rocket processing
cups. After dishwashing and before each use, always check to
make sure the gasket is properly in place, as the heat from some
dishwashers may cause the gasket to become loose.
Small
Grinding Cup
Grinding Blade/
Flat Blade
Grinding Blade
Gasket Seal
Grinding Blade
Collar
5
Tall
Blending
Cup
Shaker Lid with
Small Holes
Shaker Lid with
Large Holes
2 Solid Lids
2 Cup Rings