Button Lock; Technical Specifications - Esscom TWINTALKER 9200 LONG RANGE Manuel D'utilisateur

13.13 Key-Tone On/Off
When a button is pressed, the unit will beep briefly.
To set the key-tone.
• Press
• Press
• Press
13.14 Dual Channel Monitor function
In stand-by, the PMR is set on one set channel with CTCSS code. The PMR will only receive
signals transmitted on that channel and CTCSS code.
Dual Channel Monitor allows you to monitor a second channel with CTCSS code.
• Press
• Press
• Press
• Press
• Press
To disable the function select 'OFF' when setting the channel.
When the Dual Channel Monitor function is activated, the PMR will switch
sequentially between the standby channel + CTCSS and the Dual
Channel + CTCSS.

13.15 Button Lock

• Press and hold
• Press and hold

14 Technical specifications

PMR
Channels
CTCSS
Frequency
Range
Batteries PMR
Transmission Power
Modulation Type
Channel spacing
Esscom Twintalker 9200
6 times. 'to' will be displayed.
to enable (ON) or
to confirm your selection and return to the standby mode.
PTT
7 times, DCM OFF appears on the display.
or to change the channel.
to confirm the channel selection and go to CTCSS
SUB-CHANNEL SELECTION
or to change the CTCSS.
to confirm.
PTT
and
BUTTON LOCK mode. The BUTTON LOCK icon is displayed on the
LCD Screen.
and
LOCK.
8
38
446.00625MHz - 446.09375 MHz
Up to 9 Km (Open field)
4 x AAA Alkaline or NiMh rechargeable battery pack
=< 500mW ERP
FM - F3E
12,5 Khz
disable the key Tones (OF).
together for 4 seconds to activate the
together again to deactivate BUTTON
Esscom Twintalker 9200
11