Product Description; Use And Operation - oneConcept Jimmie Andrews Mode D'emploi

PRODUCT DESCRIPTION

1 Hopper
2 Auger
3 Strainer
4 Strainer holder with
cleaning brush
5 Bowl
6 Pulp spout
7 Juice Spout

USE AND OPERATION

1. Place the Juice bowl (5) on top of the main body, make sure the juice bowl
in position so it locks into the main body and cannot be removed.
2. Put the strainer holder (4) into the juice bowl.
3. Put the strainer (3) into the strainer holder.
4. Put the Juice Auger (2) into the strainer
5. Fit the Hopper (1) over the Juice bowl and turn in position so it locks into
the main body.
6. Place the pulp tank so it fits in position on the left hand side of the juicer's
main body.
7. Place the juice cup under the Juicer spout.
8. Slide the food pusher down the food chute. The pusher can only fit one
way.
Important: If the Juice bowl and lid are not correctly assembled, the Juicer
will not operate. This is a safety feature. Please press the "R" button lightly
to stop the Juicer, and over press will damaged the motor of Juicer. Product
prohibits idling condition before feeding fruits and vegetables.
EN
11