Coway AQUAMEGA 100 Mode D'emploi page 12

INSTALLATION
First, connect the white tubing to the feed water
connection , then connect to the diverter or T-valve.
1
(Remove sticker before using this product.)
Second, select installation method according to your
kitchen condition between 1. Diverter and 2. Adapter type
1.DIVERTER TYPE
Part Names and Uses
1
2
Diverter
< Water Flow >
To the water purifier
Connector Set
① 0.8071-28 UNF
* The arrow lines in the figure : Represents the specifications (diameter) of the water faucet.
Feed water connection
1 Ring Nut : The nut connected to the water
3
2 Handle (Switch) : The handle that determines the
3 Fitting : This is the fitting that connects the tubing
for water supply from faucet to the device.
4
4 Water Outlet : The water outlet where the
To the water outlet
② 0.9213-28 UNF
faucet (M22XP1.0)
direction of the water output.
tap water comes out.
* The direction of the
handle is the same as
that of the water flow.
③ 0.7205-28 UNF
1