Technical Specifications - PURE Jongo S3 Mode D'emploi

Technical specifications

Model number
Speakers
Audio output
Input connectors
Controls
Display
Network
Codec support
Mains power supply Adapter:
Battery
Dimensions
Weight
Approvals
12
S3/S3X
4 x Mylar ¾" high frequency drivers, 1 x Neodymium
motor upward firing 3.5" mid/bass driver
4 x 2.5W + 10W RMS
9V DC power adaptor socket (110-230V supplied),
ChargePAK connector, 3.5mm line-in for auxiliary devices.
USB for product updates, Bluetooth (dongle supplied) and
Ethernet connectivity (optional adapter available)
Power, Vol+, Vol-, Mute, Audio profile, Wi-Fi setup, Reset
1" LCD display
Wi-Fi: 802.11b and 802.11g supported with WEP and
WPA/WPA2
Ethernet (requires optional adapter): 10/100 Mbps
Bluetooth: A2DP supported via supplied USB dongle
Includes WMA (Standard V9), AAC, MP3, MP2
Input 100-240V AC, 50/60Hz, 0.5A;
Output 9V DC, 1500mA
Main unit: 9V DC, 1500mA
ChargePAK F1 (supplied)
131 mm wide x 139 mm deep x 135 mm high
1.25 kg with ChargePAK, 1.0 kg without ChargePAK
CE marked. Hereby, Pure, declares that this Band II LPD
device is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC. The
Declaration of Conformity may be consulted at:
http://www.pure.com/R&TTE-DoC
Australian C-Tick N1600 and Electrical Safety