Keypad Lock; Display Illumination - Insignia IN-FR10111 Guide De L'utilisateur

IN-FR10111.book Page 7 Saturday, January 29, 2005 2:56 PM
IN-FR10111 GMRS/FRS Radio
Quick reference chart
Monitor
Monitor mode lets you hear noise so you can adjust the volume level of the
radio when not receiving a signal. Monitor mode should also be used to check
activity on your current channel before transmitting.
To enter Monitor mode:
1 Press and hold the MON/SCAN button for one second. Monitor mode
becomes active.
2 To exit Monitor mode, press and hold the MON/SCAN button for one
second again.
Scan
Your radios can scan all 22 channels for activity.
To enter Scan mode:
1 Quickly press the MON/SCAN button. Your radio rapidly scans each
channel and stops on any active channel for five seconds before
resuming. When you press the PTT button to transmit on an active
channel, the scanning function stops and remains on the active channel.
To resume scanning, quickly press the MON/SCAN button again.
2 To exit Scan mode, quickly press the MON/SCAN button again.
Call tone
Your Insignia radios can transmit a call tone for a fixed length of time.
To send a call tone:
1 Press the CALL button. The TX icon appears while transmitting a call
tone, and a tone can be heard on the speaker for confirmation.

Keypad lock

To avoid accidentally changing the radio setting, use the keypad lock.
To activate keypad lock:
1 Press the LOCK button for four seconds. The Key Lock icon appears on
the display. PTT and CALL will still be active.
2 Repeat the same procedure to unlock the keypad.

Display illumination

While your radio turns on, the display light turns on for about seven seconds.
The display light is also activated when the MENU button is pressed.
www.Insignia-Products.com 7