KEUCO Royal Lumos 14305 171351 Instructions D'utilisation page 3

US
Read all instructions before using or installing this product.
Technical data
– Maximal load each shelf:
– Supply voltage:
– Required electrical outlet:
– Max. power consumption:
Prod. No.:
- 14305 171351:
- 14306 171351:
Maximal load mirror cabinet total:
- 14305 171351:
- 14306 171351:
– Degree of protection:
– Ambient conditions:
Operating temperature
Storage temperature
– Luminous color
Mounting dimensions, see page 11.
CAUTION: Risk of personal injury: This
product is very heavy. Get assistance lifting the
cabinet.
Before installation check whether the fastening materials
included are suitable for the anchoring base. The fas-
tening materials are suitable exclusively for stud walls
with timber constructions or for drywall constructions
with timber wood reinforcement.
Installation, see fi gure 1 onwards on page 12.
• Mark the wall bracket position, see fi gure 1.
• Prepare the safety locking, see fi gure 2.
• Mount the wall brackets and safety locking to the
wall, see fi gure 3.
WARNING - GROUNDING
INSTRUCTIONS
This product must be connected to a grounded me-
tal, permanent wiring system, or an equiment-groun-
ding conductor must be run with the circuit con-
ductors and connected to the equipment-grounding
terminal or lead on the product.
Wiring diagram, see fi gure 4 on page 13.
• Connect the mirror cabinet to the power supply,
see fi gure 5a/5b.
• Hang the mirror cabinet on the wall from above,
see fi gure 6.
• Fix the mirror cabinet to the wall by turning the
screw of the safety locking counterclockwise, see
fi gure 7 on page 14.
• Place the glass shelf holders in the mirror cabinet,
see fi gure 8.
max 3.3 lb
120 V AC / 50/60 Hz
15 A / 1800 VA
Width Weight Light
47-1/4" 81.57 lb 54 W
55-1/8" 92.59 lb 54 W
121.25 lb
132.28 lb
NEMA 1
32° – 113° F
-40° – 158° F
3000 Kelvin
• Place the glass shelves in the mirror cabinet,
see fi gure 9.
• Observe the maximum load on the glass shelves
(3.3 lb), see fi gure 10.
• Adjust the doors of the mirror cabinet, see fi gure
11, 12 and 13 on page 15 and 16.
Operation
The mirror can be optionally actuated similar
to a toggle switch with a button on the mirror
(A) or with an external light switch (B), see
circuit diagram fi gure 4 on page 13.
Button functions
Button Function
Light on/off
• Pressing the button switches the mirror cab-
inet on with the selected settings. The white
LED goes off.
• Pressing the button again switches the mirror
cabinet off. The white LED lights up.
To change mode
• Switch off the refl ector.
• Press the button and hold it down for 15
seconds.
- The light comes on again if the mode has
been changed.
Repeat the procedure described to re-enable
mode 1.
• The white LED can be deactivated.
– Switch on the mirror cabinet.
– Press and hold the button for 15 seconds.
- The lighting gets lighter or darker.
- The lighting switches off briefl y and the
white LED is deactivated.
To switch the white LED back on, repeat the
described procedure.
Front and wall lighting
• The front and wall lighting is switched on by
pressing the button when mirror is switched
on.
• Pressing the button again switches the light
off.
B
A
3