Bradley Halo S19314 Serie Manuel D'installation page 9

S19314
2 Assembly — Connect Drench Shower Components
Standard eyewash unit is shown. Other units are similar.
Apply pipe sealant (supplied by installer) to all male-threaded pipe
joints, making sure not to get any excess over the edge of the pipes.
BSP = British Standard Pipe Thread (not available in the U.S.)
Showerhead with
stainless steel
shroud option
8
netzerotools.com
Use teflon
tape only.
7/8/2013
netzerotools.com
Stainless steel
tee with reducer
1¼" NPT below supply inlet,
or 1¼" BSP
1" outlet
for shower
pipe length
Alternate 1¼" NPT below
supply inlet, or 1¼" BSP
If this tee is used as the
supply inlet, use the plug
on the top supply inlet.
pipe length
Installation