ARENDO 303059 Mode D'emploi page 24

9. Troubleshooting
Error
The vacuum sealer does
not start
The sealing is not work-
ing properly
The vacuum operation is
not working properly
After vacuum packing,
the plastic bags start
leaking after some time
24
Troubleshooting
• Check if the power cord is damaged.
• Insert the plug into the power socket.
• Check the sealing bag. Ensure that it is not folded
too much or crushed/open.
• Check whether the bag is on the sealing joint.
• Ensure that the right side of the vacuum bag is
inside the vacuum sealer.
• Check if the vacuum bag is bent.
• Ensure that the contents of the bag does not
occupy more than 3/4 of the space.
• Ensure that the vacuum pump is not covered.
• Do not vacuum seal any sharp or pointed
objects, or use a separate plastic bag before
vacuum sealing.
• Some foods release gases that may accumulate
in the bag.
English