Chronograph Mode - Gill Regatta Race Timer W014 Mode D'emploi

6.0 Chronograph Mode

Chronograph Mode
- In Chronograph Mode, the Hour, Minute, and
second digits appear on the middle row of
the display.
- The Chronograph (CHR)
the upper row of the display
- The Lap number and 1/100s appears on the
lower row of the display.
Chronograph Mode - Operation
- In Chronograph Mode, press the [S/L/S]
button to start the CHR and Lap time.
- Whilst the CHR is counting, press the [S/R]
button once to stop and the [S/L/S] button to
re-start the counting.
- The elapsed time between the two start/stop
key strikes will appear on the display.
- During running, press the [S/L/S] button to
create a lap time.
Lap
No.
Counting display
[S]
icon appears on
Resetting the Chronograph
- In Chronograph mode, press and hold the
[S/R] button for about 2 seconds while the
CHR counter is stopped.
Recalling the Chronograph
- In Chronograph mode, press the [S] button
to enter to the CHR recall display.
- Press the [S/L/S] or [S/R] buttons to recall
individual lap times and the total time.
- In the Chronograph recall display, press
the [S] button once to return back to the
Hour,
Chronograph mode.
Minute,
Second
NOTE: The MAX. counting range of the
1/100 sec
chronograph is 99 hours 59 minutes and
59.99 seconds, and the MAX. lap is 50 laps.
[M]
[S/R]
Hour, Minute, Second
1/100 sec
[S/L/S]