5.3 Timer Mode - Countdown Timer
Synchronisation Function
- When the Countdown Timer is running, press
the [S/L/R] button to round off the counting
time.
- If the timer is in "SYNC Down" status, the
timer will round down to the next full minute.
- If the timer is in "SYNC Round" status, the
timer will round down or up to the closest
minute.
Repeat Function
- In Timer Mode, press and hold the [M] button
for about 2s, to toggle the repeat function
ON/OFF.
- When Repeat icon
repeat counting the pre-set values.
is on, the timer will
Repeat on icon
Alert Indications
- The watch will beep once at each minute.
- The watch will beep once at 50, 40, 30 & 20
seconds for the last minute of countdown,
and it will beep once at each second for the
last 10 seconds
- Long beep for 3 seconds when it reaches
zero.
- The watch will keep silence when the Alert
option has been set to OFF.
- For 5.4.1.0 sequence, two beeps will be
heard at minutes 4 and 1.
Countdown display from the last 59
seconds to 1 second shows in big digits.