Remove Bottle Assembly; Breast Pump Care - first years Sole Expressions Manuel D'instructions

Sole Expressions ™ Single Electric Breast Pump
1. Remove hose connector from
3-way adapters with baffle.
Important: Place Flexi-Fit
shield in this drying position
to prevent warping.
Clean all parts prior to initial use and after each use.
Important: Do not sterilize any part of the breast pump in the microwave.
1. Always separate the 3-way adapter from breast shield before cleaning.
2. After cleaning the valve, gently lift the end of the soft rubber piece (the end with the raised
bumps) to insure the soft rubber piece can flap freely and that it is not stuck to the valve.
12 get ready for thefirstyears.com

Remove Bottle Assembly

2. Remove shield, adapter, valve and baffle for cleaning.
™

Breast Pump Care