DeLOCK 62438 Mode D'emploi page 4

English
Hardware Installation
1.
Turn off your PC and unplug the power cord.
2. Open the housing.
Connect an IDE device to a motherboard with SATA interface:
3. Connect your IDE device to the converter.
4.
Connect an optional SATA cable to the yellow SATA port of the converter and
to a free SATA port of your motherboard.
5. Connect a power cable of your power supply to the converter.
Or connect a SATA device to a motherboard with IDE interface:
6. Use an optional SATA cable to connect your SATA device to the black SATA
connector of the converter.
7. Set the switch to the required Master / Slave / Cable Select mode on the
converter.*
8. Connect the converter to a free IDE port of your motherboard.
9. Connect a power cable of your power supply to the converter.
10. Reattach the housing and connect the power cord to the AC adapter.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 03/2018
-4-