Joycare Tin-up Manuel D'instructions page 15

JC-344
GB
INSTRUCTIONS FOR USE
After having completely recharged the gun (see the section "instructions for
recharging"), remove the container of solution. To do this, turn it so that the rear
arrow is positioned under the symbol "open" and then carefully remove the
container from the pistol.
The closed and open symbols and the arrow are printed on the device.
Remove the silicone reducer ring and pour the tanning solution into the
container. Always make sure that the level of solution inside the container never
exceeds the MAX level of 30ml.
Reinsert the silicone reducer ring, insert the air pipe into the hole of the ring and
reclose by rotating the container to bring it to he closed position .
Turn the button to activate spraying (2) into the "unlock" position .
The product is now ready for use. To best understand the various steps for
inserting the tanning liquid into the spray gun, we advise that you also examine
the series of images provided at the start of this instruction manual (fig 1-12).
A FEW TIPS FOR THE CORRECT USE OF TIN-UP
Do not spray the product close to linen or furniture.
Use a mat to stand on to avoid staining the floor.
The product does not stain hair but to avoid the solution being sprayed on to
the hair you can protect it using a shower cap or towel. Always keep the device
in a vertical position about 15-20cm away from the body and press the button to
activate the spray, trying to keep the jet parallel and at the same distance from
the body, as shown in the explanatory diagram below. Constantly keep the spray
gun moving during the application, using vertical or horizontal movements on
the areas that you intend to tan. Never linger on a specific zone.
15/20cm
Correct movement Wrong movement
15