Grundig GML-1912M Manuel D'utilisation page 23

Contrast:
This is used to set the brightness of the screen. Press /\ or \/ to adjust the parameter.
Brightness:
This is used to adjust the image contrast. Press /\ or \/ to adjust the parameter.
Hue:
This is used to adjust the image hue. Press /\ or \/ to adjust the parameter.
Saturation:
This is used to adjust the image saturation. Press /\ or \/ to adjust the parameter.
Colour Temp.:
Press /\ or \/ to adjust the colour tones ("Cool, Warm, Normal").
In VGA and HDMI mode, a sub-menu will appear when you press /\ or \/ to select
<Colour Temp.>. In this sub-menu it is possible to adjust the colour tones ("Cool, Warm,
Standard, SRGB, User"). When you select <User>, it is possible to set user defined
Red/Green/Blue values (R/G/B).
Scale:
Adjust the V-size of the display picture. Press /\ or \/ to set it the V-size to "FULL" or
"4:3".
Overscan:
Activate or deactivate the Overscan function to see the full picture, in case the scene is
cut off at the edges. Press /\ or \/ to adjust the parameter.
Picture Mode:
Press /\ or \/ to select the picture mode ("User, Standard, Movie, Vivid"). Press /\ or \/ to
adjust the parameter.
7.2. AUDIO
Balance:
Increase or decrease balance of the audio output from left to right. Press /\ or \/ to adjust
the parameter.
Bass:
Increase or decrease the bass level of the
audio output. Press /\ or \/ to adjust the
parameter.
Treble:
Increase or decrease the treble level of the
audio output. Press /\ or \/ to adjust the
parameter.
English 5