Low Battery Consumption Mode; Vox Function: Voice Activation - BRONDI PMR FX-100 TWIN Manuel D'instructions

2. When the handset detects any kind of signal (vocal or call)
on one of the 8 channels, the scan pauses and the signal
detected can be heard in the speaker.
3. The scan will automatically restart a few seconds after the end
of the receipt of the signal.
4. To complete the scan, briefl y press the MENU button.
WARNINGS:
Once a signal has been detected you can listen to your contact,
but you can only transmit a communication if the CTCSS code set
on his handset is the same as that set on yours.

6.9 LOW BATTERY CONSUMPTION MODE

The handset will automatically switch to low battery consumption
mode after 4 seconds of inactivity. Despite being in this mode, the
handset will be able to receive communications.
IMPORTANT: when you are not using the handset as a 2-way radio,
we advise you to switch it off (pressing the
down) to optimise the maintenance of the battery charge.

6.10 VOX FUNCTION: VOICE ACTIVATION

This function enables activation with both hands free; with
the function active, your handset will detect your voice and
automatically activate transmission. You can set 3 levels of
sensitivity.
Procedure:
1. From stand-by mode, press the MENU button 3 times. The word
VOX
will appear on the display and the current setting of the
function will fl ash.
2. Repeatedly pressing the + or – buttons, you can choose on of
the following settings:
OF
Function deactivated
button and holding it
21
VOX