IMPORTANT: Please mind that the socket is at the top and the long part of the
case is facing downwards. Otherwise water will enter the socket. The splash
protecti on is only guaranteed when using IP 44 safety plugs.
6 Possible sources of faults
LED on the remote control does not shine when one of the butt ons is pressed:
• check whether the batt ery has been fi tt ed and the polarity equals
agrees with the labelling in the batt ery compartment
• check whether the batt ery is empty and if necessary, replace it
The LED on the remote control lights up but it does not operate the desired
remote control socket:
• check whether the system code in the remote control matches
that of the remote control socket
• check whether the channel on the remote control socket corre-
sponds to the butt on you are operati ng on the remote control.
• check whether the socket which the remote control socket is
plugged into, is connected to the power.
If none of these approaches solves the problem, please contact the manufacture
or dealer.
7 Warranty
The manufacturer off ers a warranty of 2 years on the product with respect to
workmanship and material. Repairs may only be carried out by an authorised
customer service. The original sales receipt must be enclosed as evidence.
The following occurrences are excluded from this warranty: normal wear and tear,
changes, modifi cati ons, damage due to lack of att enti on, external interference,
areas of applicati on for which the product is not designed or completely or
parti ally dismantled products.
English
13