LG SIGNATURE LSR100 Manuel Du Propriétaire page 53

Symptoms
Frost or condensation
has formed inside or
outside the appliance.
The appliance is
noisy and generates
abnormal sounds.
The side or front of
the appliance is warm.
There is water inside
or outside of the
appliance.
Reason
Did you open and close the
appliance door frequently or is
the appliance door improperly
closed?
Is the installation environment
humid?
Is the appliance installed on
a weak floor or improperly
leveled?
Does the rear of the appliance
touch the wall?
Are objects scattered behind
the appliance?
Is there an object on top of the
appliance?
There are anti condensation
pipes fitted to these areas
of the appliance to reduce
condensation forming from
around the door area.
Is there water leakage around
the appliance?
Is there water on the bottom of
the appliance?
Solution
• Frosts or condensation can form if
the outside air penetrates inside the
appliance.
• Condensation can appear on the
exterior of the appliance if the
installation area is too humid or on a
humid day such as a rainy day. Wipe
off any moisture with a dry cloth.
• Install the appliance on a solid and
flat area.
• Adjust the installation position to
allow enough clearance around the
appliance.
• Remove the scattered objects from
behind the appliance.
• Remove the object on top of the
appliance.
• The heat releasing pipe to prevent
condensation is installed on the front
and side of the appliance. You may
feel it particularly hot right after the
appliance is installed or during the
summer. You can be assured that this
is not a problem and is quite normal.
• Check if the water has leaked from a
sink or another place.
• Check if the water is from the thawed
frozen food or a broken or dropped
container.
EN
53