Moulinex Faciclic Maxi Mode D'emploi page 34

CLEANING
Unplug the appliance and remove the bowl or accessories.
The blades of the accessories are very sharp. Handle them with caution.
Rinse the jug, bowls and lids immediately under running water and the removable parts in hot
water and washing up liquid.
For easy cleaning, you can detach the blade unit (D1) from the jug (D4) by pressing the "clic"
button (D2) (fig. 7a, 7b, 7c).
The seal of the blade unit (D1) is not detachable. The lid joint (D6) is removable.
The jug (D) and the accessories (E) and (F) can be cleaned in the dishwasher in the top basket
with the "ECO" or "LIGHTLY SOILED" programme.
Clean the motor unit (A) with a damp cloth and dry carefully.
Never immerse the motor unit (A) in running water or any other liquid..
WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK?
Problems
The product does not work.
The product stops while
in use.
Excessive vibrations.
Leak from the lid.
Causes
The plug is not connected.
The jug or accessory is not
correctly positioned or locked
on the motor unit.
The blade unit (D1) is not
correctly attached to the jug
(D4).
Overload of ingredients
(activation of electronic
motor safety device).
The product is not placed on a
flat surface.
Volume of ingredients is too
high.
Volume of ingredients is too
high.
The lid is not
positioned.
The seal (D5) is not well
placed on the lid.
Connect the appliance to a
socket with the same voltage.
Check that
accessories
positioned and locked on the
motor unit as shown in the
instructions You must hear a
double "click".
Unlock the blade unit (D1)
and bolt it to the jug (D4)
(fig 1a, 1b, 1c) once again.
In this case, unplug the
product, put the button back
to 0 position and let it cool
down for a minimum of 30
minutes.
Place the product on a flat
surface.
Reduce
ingredients processed.
Reduce
ingredients processed.
correctly Lock the lid correctly on the
blender jug.
Place the seal (D5) correctly
on the lid (D6) (fig. 2a).
Solutions
the jug or
are correctly
the quantity of
the quantity of
EN
31