Dostmann 30.3009.54.IT Livret D'instructions page 27

OUTDOOR TEMPERATURE 1, 2, AND 3
If more than one transmitter is being used, to alternate between the temperature readings of transmitter 1,
2, and 3, simply press the "SET/CHANNEL" button. If the reading is from transmitter 1, then the
identification numbers 1 will be displayed in the outdoor temperature section of the LCD. The same will
apply to the next transmitter and so on. However, if only one transmitter is used, no identification number
will be displayed on the LCD.
TEMPERATURE TRANSMITTER
The outdoor temperature is measured and transmitted every 4 seconds.
The range of the temperature transmitter may be affected by the temperature. At cold temperatures the
transmitting distance may be decreased. Please bear this in mind when placing the transmitter.
868 MHz RECEPTION:
If the outdoor temperature data is not being received within three minutes after setting up (or outdoor
display always show "- -. -" in the outdoor section of the temperature station during normal operation),
please check the following points:
1. The distance of the temperature station or transmitter should be at least 1.5 to 2 meters away from
any interfering sources such as computer monitors or TV sets.
2. Avoid placing the receiver onto or in the immediate proximity of metal window frames.
3. Using other electrical products such as headphones or speakers operating on the same signal
frequency (868MHz) may prevent correct signal transmission and reception.
4. Neighbors using electrical devices operating on the 868 MHz signal frequency can also cause
interference.
26