Dynex DX-WEGRTR Mode D'emploi page 41

Setting up your wireless router
To update the router's firmware:
1 On the Firmware Update page, click Browse. A window will open that lets you select
the location of the firmware update file.
2 Browse to the firmware file you downloaded, then select the file by double-clicking on
the file name.
3 The Update Firmware box will now display the location and name of the firmware
file you just selected. Click Update. You will be asked if you are sure you want to
continue.
4 Click OK. You will see one more message. This message tells you that the router may
not respond for as long as one minute as the firmware is loaded into the router and the
router is rebooted.
5 Click OK. A 60-second countdown will appear on the screen. When the countdown
reaches zero, the router's firmware update will be complete. The router's home page
should appear automatically. If not, type in the router's address (default =
192.168.2.1) into the navigation bar of your browser.
The firmware update is complete.
41