Assembly - TrimmerPlus CB720 Manuel De L'opérateur

WARNING:
To prevent serious personal injury, take the
following steps before installing or removing the nozzle:
• Stop the unit and allow the impeller to come to a
complete stop
• Disconnect the spark plug wire
WARNING:
To prevent serious personal injury, do not
insert hands into the nozzle or blower tube when removing
or installing the nozzle.
INSTALLING AND REMOVING THE NOZZLE
Installing the Nozzle
1. Align the bump slots on the inside of the nozzle with the bumps
on the blower tube (Fig. 1). Push the nozzle onto the blower tube.
2. Turn the nozzle clockwise until it locks into place with an audible
click (Fig. 2).
Removing the Nozzle
1. Turn the nozzle counterclockwise until it unlocks from the blower
tube (Fig. 2).
2. Pull the nozzle off of the blower tube (Fig. 2).

ASSEMBLY

Nozzle
6
Bumps
Bump Slots
Blower Tube
Fig. 1
Lock
Unlock
Fig. 2