Self-Diagnosis - Klarstein MAX BREEZE SMART 15K Mode D'emploi

EN
44
Adjust the air vent
Open the horizontal louvers before
operating the appliance.

Self-diagnosis

The appliance has a self-diagnostic function. If there is something wrong with the
appliance, the screen displays "E1" or "E2".
• "E1" means that the room temperature sensor cable is not connecting properly (the
cable is in the middle of the evaporator).
• "E2" means that the anti-freeze sensor cable is not connected correctly (the cable is
on the side of the evaporator).
Note: Self-diagnosis "E2" is only for models with cooling and heating function. In the
event of these error messages, contact the customer service. Do not attempt to repair
the appliance yourself.
All the above functions can also be used with the
remote control supplied with the appliance.
To use the remote control, 2 AAA batteries are
required (not supplied).
The louvers can be adjusted in the
desired direction.