Parker SCPSDi Mode D'emploi page 42

Programming
1 Scroll through the menu options with the
2 Display the corresponding parameter with the
3 Pressing the
values will change faster when you hold down on the arrow key.
4 Changed values must be confirmed by pressing Enter
5 Press
back to displaying measurements. (You will be automatically returned
to the measurements display when no key is pressed for 60 seconds.)
The switch continues to use the existing parameters for its moni-
toring functions until the current change has been confirmed.
42
key changes the selected parameter. The parameter
and at the same time in order to leave the menu and go
key .
key .
.