Publicité
Les langues disponibles
Les langues disponibles
1074, Avenue des Carrières – Z.A la Plaine du Caire III
13830 ROQUEFORT LA BEDOULE – FRANCE
www.ermax.fr - E-Mail : accueil@ermax.fr
Fitting kit
- 3 screws 6x10 black and big head
- 1 threaded fastener Ø6
Fitting instructions
- Remove the original hugger by taking off the 4 screws securing it.
- Place the threaded fastener on the fitting bracket (see the pic
nearby).
- Place the hugger on the swing arm and fit it with the provided screws and washers. Screw 6x15 is placed on
the fixation at the threaded fastener location (see pics below).
- Tighten all screws, without overwriting the hugger.
* Painted and varnished parts are not guaranteed against high pressure steam washes or aggressive cleaning products which can damage them and unstuck the varnish. We advise moreover, according to the technical data of our
painting suppliers, to wait one month to obtain a complete polymerization of varnish.
* Accessories gone up on the motorbike will not be any more considered as new and will be neither retaken nor exchanged.
* Ermax accessories are foreseen for original equipments. They will not be guaranteed if they are used in others conditions.
* Due to vehicles made tolerances, beyond our control, some Ermax products might need adjustings to fit.
* The mentioned label of motorbikes's manufacturers are indicated exclusively as a reference to Ermax accessories.
* Care to excessive clampings which may damage or break our plastic accessories and aluminium screws.
* A few tyres, faithful to ETRTO standards, may be in fact bigger and higher than dimensions engraved on the tyre (until + 10 mm). They may be not compatible with undertrays and rear huggers which we made with original
tyres and whose dimensions correspond to these ones engraved on tyre.
* Harden the rear shock absorber while drivings with load or on dented roads.
- 1 screw 6x15 black and big head
- 4 nylon washers Ø6
Screw 6x15
« CAUTION »
FITTING INSTRUCTIONS
ERMAX REAR HUGGER
ADAPTABLE ON MSX 125 2013 → ∞
Estimated fitting time : 15 min
Publicité
