EDM Product 07669 Mode D'emploi page 13

REF. 07669
from power socket.
- Check if there is any obstacle inside the container and remove it if it is the case.
- Check if the blade insert is attached correctly and can rotate freely.
- If the blade insert does not reach its full rotation speed with in several seconds,
unplug the device from power socket and before resuming to work, remove some
of the foods from the container.
- If any humid foods remain attached to the container walls, scrape them away
using spoon or similar object back to the centre of the container.
- Never use your fingers to do so!
- To achieve even crushing of foods, fill in pieces of the same size and do not overfill
the container above the MAX sign.
- If you wish to fine-crush the ingredients to a mash, they mush be boiled previously.
- Do not overfill the container.
- Do not switch the device on if the container is empty.
CLEANING
* Disconnect the motor block from the wall outlet before cleaning.
* Wipe the motor block with damp cloth. It is forbidden to immerse the motor
block into the water or any other liquids.
* Do not use abrasive cleansers or the sponge with rough surface for cleaning.
* After using the chopper wash the chopper bowl and lids in the warm soapy water,
rinse and leave until the complete dry out. Afterwards assemble the appliance.
Remember, the remnants of the water could cause the mould. After processing the
foodstuff containing the strong dye-stuffs (for example. carrot or beat root) the
plastic parts of the appliance could be colored; you can remove the color by the
cloth damped with the vegetable oil.
Be careful - blades are sharp! To preclude possible injuries, use clear water while
washing the device. Like that, you can always see the blade.
WASTE
This symbol on the product or in the instructions
means that your electrical and electronic equipment
must be disposed at the end of its useful life in a
specialized container; Do not dispose it in the usual
household waste container. In the EU there is special
waste collection systems for subsequent recycling. For
more information, contact with the local authority or
the retailer from whom you purchased the product.
THE MANUFACTURER DECLINES ALL RESPONSIBILITY DUE TO AN INCORRECT
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
THE INVOICE IS THE PRODUCT WARRANTY
INSTALLATION OF THE APPLIANCE.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
WARRANTY
The warranty period is 24 months from the date of
purchase and covers all manufacturer's failures
regarding material and quality. This warranty applies
only if the instructions for use have been followed, and
it is voided if the device has been forced or used
improperly, or if it has been repaired by an unauthori-
zed person.