English; Before First Time Use; Using The Blender; Cleaning And Care - Koenic KBL713 Mode D'emploi

English

Congratulations
Thanks for your purchase of a KOENIC product.
Please read this manual carefully and keep it
for future reference.

Before first time use

Clean the blender 2-3 times as described in
Cleaning and care.

Using the blender

1. Place the jug on the motor unit and lock it.
2. Cut the ingredients into small dices and put
them into the jug. Do not exceed the MAX
markings (LITRES; CUPS and OZ).
3. Firmly close the lid; fit measuring cup on the
lid and turn until it locks into place.
4. Turn speed selector to desired position.
When using pulse function, hold the switch
at P position until finished.
5. When mixture has reached desired consist-
ency, turn speed selector to off position 0.
6. Unlock the jug; remove the lid and serve.

Cleaning and care

1. Turn coupling clockwise to remove it from
the jug. Hold in upright position in order for
the blade not to fall off.
2. Carefully remove blade from the coupling.
Remove seal ring from the blade.
3. Remove measuring cup and seal ring from
the lid.
4. Clean the blade, seal rings, lid, measuring
cup and jug in hot soapy water.
5. Dry all parts and then reassemble.
Note
The blade, lid, measuring cup and jug can
be cleaned in the dishwasher, but not hot-
ter than 70 °C.
14
Before use plug the
blender.
Align UNLOCK with
the arrow on the mo-
tor unit.
Fill the jug, do not
exceed the MAX
markings.
3 min
Operate the blender
not longer than 3
minutes at a time.
After use unplug the
blender.
Turn clockwise LOCK
to lock the jug.
Set desired speed to
1, 2 or P (Pulse).
Turn anticlockwise to
unlock the jug.