Safety Instructions - Koenic KBL713 Mode D'emploi

Safety Instructions

• Before connecting the appliance to a socket
outlet, make sure the voltage indicated on the
appliance corresponds to your local mains volt-
age.
• For safety reasons, this class I appliance is
provided with a plug with earth connection. Al-
ways connect this appliance to a mains socket
outlet with a protective earthing vconnection.
• This appliance is not intended for use by per-
sons (including children) with reduced physical,
sensory or mental capabilities, or lack of experi-
ence and knowledge, unless they have been
given supervision or instruction concerning
use of the appliance by a person responsible
for their safety. Children should be supervised
to ensure that they do not play with the appli-
ance.
• If the supply cord is damaged, it must be re-
placed by the manufacturer or its service agent
or similarly qualified persons in order to avoid
hazard.
• Caution: Risk of injury. The cutting blades are
very sharp. Use care when handling the blades,
emptying the bowl, during cleaning and stor-
age.
• Always disconnect the blender from the supply
when unattended and before assembling,
disassembling or cleaning.
• Do not allow children to use the blender with-
out supervision.
• Switch off the appliance and disconnect from
the supply before changing accessories or ap-
proaching parts that move in use.
• If the blades get stuck, unplug the appliance
before removing the ingredients that block the
blades.
• Only use with the stand provided.
• CAUTION: Ensure that the blender is switched
off before removing it from the stand.
• Do not immerse the motor unit in water
or any other liquid, nor rinse it under the
tap. Only use a moist cloth for cleaning
the motor unit.
12
• The appliance is intended for household use
only. Do not use the appliance for purposes
other than described in this manual in order to
avoid hazardous situation.
• Do not use outdoors.
• Do not exceed the quantities and processing
times indicated in this manual.
• Do not use attachments other than recom-
mended by the manufacturer or specified in
this manual.
• Do not operate this blender longer than
indicated in the user manual when blending
or chopping heavy loads. After this amount of
time, let the appliance cool down sufficiently
before next operation. None of the recipes in
this user manual constitute heavy loads.
• Never carry or pull the appliance by the supply
cord. Do not pull the supply cord over sharp
edges. Do not jam or bend it.
• Never put the appliance or supply cord on hot
surfaces or near open flames.
• Before switching on, make sure the jug is in
place with the lid and measuring cup being
properly assembled. This appliance will not
work without the jug in place.
• Do not use the appliance without any load in
the jug.