Auto Power Link - Samsung HW-N300 Mode D'emploi

Step 2. Change the Soundbar's mode to D.IN
W

Auto Power Link

This Function automatically turns on the Soundbar when the TV is turned on if the Soundbar is
connected to the TV by an Optical Cable (not supplied).
Press the button on the remote control to turn on this function.
• Auto Power Link is set to ON by default. (To turn off this function, press the
remote control.)
• Depending on the connected device, Auto Power Link may not function.
• This function is only available in the "D.IN" mode.
Mode
OFF
ON
Remote control Button
Right Side of the Soundbar
LED indicator
Blinking
W W
Blinking
W W
ENG - 15
(OR)
button on the
R
G