How To Ride - MPMan TR200 Mode D'emploi

4. How to ride

4.1 How to ride
Warning: There is risk of falling down during learning, so make sure to wear helmet and protection kits all the time.
1. Turn on the scooter by press 2S and check the battery power.
Power key
3. To stop riding, release the throttle and use the handbrake to
gradually coast to a stop then step off the scooter one foot at
a time. Be extra cautions when dismounting for the first time.
Warning: If scooter has both electric brake and rear physic brake, the electric brake is prior to rear brake, which is only used as auxiliary brake when
electric brake does not work properly.
DO NOT step on rear brake for a long time. Or it will break the tire and fender
2. Once the power is on it is safer to start riding with one foot on the deck keeping the other
foot on the ground for pull off, once the speed up to 10km/h then push accelerator and
place the other foot on the deck, this is safer and more controlled than pulling off with
two feet on the deck as you will have less control and stability with two feet on the deck.
Skillfully use the accelerate throttle valve to speed up or slow down when riding.
4. Turn off the scooter when finish using the product. .
03
Power key