Niko 16-657-01 Mode D'emploi page 26

16-657-01
1. orange-white 1. Vsup (+)
2. orange 2. Ground (-)
3. green-white 3. bus H
4. blue 4. telephony (tip)
5. blue-white 5. telephony (ring)
6. green 6. bus L
7. brown-white 7. video+
8. brown 8. video
Requirements:
- UTP cable with RJ45 connectors at both sides (color code, see fig.1).
For outdoor use: a UTP cable with gel sealing or a ATCUG cable.
- external camera with a coax cable with female BNC connector and a power cable with power
supply connector.
- motion detector and/or external contact, connected to the screw connector (for activating the
external camera).
The external camera is powered via the power connector. The image is transmitted to the camera
interface via the BNC connector.
12V sign.in grnd grnd
12V DC
230V~
26
1 + Vsup
2 - Gnd
3 Bus H
4 TEL tip
5 TEL ring
6 Bus L
7 VIDEO +
8 VIDEO -
fig.1: color code UTP cable
350-20050
N L
Attention!
Wrong cabling can severely da-
mage the products in an instal-
lation.
12V sign.in grnd grnd
external contact
fig.2: connecting the camera interface to the system
RJ45 output
programming key
coax input
12V DC output
(max. 300mA)
EN