Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3
DELAY HOUR
This option allows you to delay the start of a wash cycle for up to 24 hours.
SELECTION
With the door open, turn the dishwasher ON by pressing the ON/OFF button; then press DELAY
HOURS button to choose the number of hours you want to delay the start of the wash cycle. The
hours will show in the display window.
NOTE: To cancel the DELAY HOURS option before the start of the cycle, repeatedly press the
DELAY HOURS button until the display is blank or reads "00."
4
STARTING
After selecting the wash cycle (Step 2) and delay hours (Step 3), if desired, close the door of the
A CYCLE
dishwasher to start the cycle or begin the DELAY HOURS countdown. When the cycle starts, the
drain begins and approximately 60 seconds later the water fill begins.
5
STATUS
INDICATORS
LOW RINSE AID The red light will display when the rinse aid dispenser needs to be refilled with liquid rinse aid. Use
of Jet-Dry
buildup on your dishes, glassware, flatware, cookware and plastics. See page 6 for instructions on
refilling the rinse aid dispenser.
CLEAN
The green light will display and a beep will sound to alert you that the wash cycle is complete.
Control Panel
®
or Cascade Crystal Clear
Dishwasher
®
rinse agent removes spots and prevents new film
7
Publicité
Table des Matières
