Battery Charge Indicator; Cleaning - Philips Sonicare E7000 Serie Mode D'emploi

ENGLISH
12

Battery Charge Indicator

C
If the battery charge of your Sonicare is low, you will hear 3 beeps
after you have brushed your teeth for 2 minutes and the charge
indicator LED will blink yellow for 30 seconds.
A low charge indication signifies that 3 or fewer 2-minute brushings
remain.
When not in use, keep your Sonicare in the charger to maintain a full
battery charge.
Multiple-LED charge indicator
When the handle is placed in the charger, the green charge
indicator LEDs will blink in a rising pattern as the battery charges.
The number of blinking LEDs indicates the level to which the
battery has been charged.
When the battery reaches full charge, the LEDs stop blinking and
illuminates continuously. About once a minute, the charge indicator
LEDs go out momentarily and then come back on.This indicates that
the battery is being maintained at full charge.The full charge indication
will persist until the handle is removed from the charger.
The blinking yellow LED indicates that fewer than 3 brushings remain.

Cleaning

By following these simple steps, you should get years of worry-free
brushing:
C
1 Rinse the brush head and bristles after each use, and air dry
only.
C
2 Clean the brush head at least once a week, including under the
nut.