▶
CPU Base Clock Apply Mode [Auto]
Sets the applying mode for adjusted CPU base clock.
[Auto]
This setting will be configured automatically by BIOS.
[Next Boot]
CPU will run the adjusted CPU base clock after reboot.
[Immediate]
CPU runs the adjusted CPU base clock immediately.
▶
CPU PCIE PLL [Auto] (Z87-G43 GAMING)
Selects a PLL (Phase Lock Loop) mode for CPU PCIe. This item appears when the
installed CPU supports this setting.
[Auto]
This setting will be configured automatically by BIOS.
[LC PLL]
Enables LC PLL for normal usage.
[SB PLL]
Enables SB PLL for extreme overclocking.
▶
Filter PLL [Auto] (Z87-G43 GAMING)
Enables or disables the filter PLL for CPU. This item appears when the installed CPU
supports this setting.
[Auto]
This setting will be configured automatically by BIOS.
[Enabled]
Provides wide range of base clock for overclocking when base clock
strap be set to higher value.
[Disabled]
Provides normal range of base clock.
▶
Adjust CPU Ratio [Auto]
Sets the CPU ratio that is used to determine CPU clock speed. This item can only be
changed if the processor supports this function.
▶
Adjusted CPU Frequency
Shows the adjusted CPU frequency. Read-only.
▶
EIST [Enabled]
Enables or disables the Enhanced Intel
[Enabled]
Enables the EIST to adjust CPU voltage and core frequency dynamically.
It can decrease average power consumption and average heat
production.
[Disabled]
Disables EIST.
▶
Intel Turbo Boost [Enabled]
Enables or disables the Intel
supports this function.
[Enabled]
Enables this function to boost CPU performance automatically above
rated specifications when system request the highest performance
state.
[Disabled]
Disables this function.
▶
Enhanced Turbo [Auto]
Enables or disables Enhanced Turbo function for all CPU cores to boost CPU
performance.
[Auto]
This setting will be configured automatically by BIOS.
[Enabled]
All CPU cores would be increased to maximum turbo ratio.
[Disabled]
Disables this function.
SpeedStep Technology.
®
Turbo Boost. This item appears when the installed CPU
®
En-31