Description Of Parts; Important Warnings - Fagor MCP-45 Manuel D'utilisation

1. DESCRIPTION OF PARTS

A. Spacer comb (adjustable to 6 positions:
15, 17, 20, 23, 26 and 29mm.)
B. Comb adjustment button (on rear of
machine).
C. Set of blades
D. Thinning regulator
E. Start/stop switch
F. Power connector
G. Blade lubricant
H. Cleaning brush
I. Comb
J. Scissors
K. Adapter
L. Power socket
Inferference suppression: This device
has been deloused in compliance with
directives on infererence suppression.
Electromagnetic compatibility: This
device complies with directives on EMC
(electromagnetic compatibility).
This hair clipper is rechargeable; therefore,
it can be used cable-free if the battery is
charged. The device contains a powerful
motor and a steel cutting blade.

2. IMPORTANT WARNINGS

Before using the device for the first time
it is important to become familiar with
its different parts and accessories by
examining the figures closely.
•
Before using for the first time check
that domestic electricity voltage
coincides with that indicated on the
adapter.
• Do not use the device on wet surfaces,
near a bathtub or shower or over a sink
with water in it.
• Keep the device out of the reach of
children.
• Disconnect the device before
performing maintenance or cleaning.
• The device has been designed
exclusively for domestic use and must
be used exactly as described in this
manual.
EN
• Do not wrap the cable around the
device.
• Check cable condition regularly and if
damaged contact an authorised After
Sales Support service.
• Do not press the device against the skin
when using without a comb, as this can
cause small cuts.
• The device should not be exposed to
temperatures below 0 ºC, or above 35 ºC.
• Avoid exposing the device to direct
sunlight.
• This device is not suitable for use
by individuals (including children)
with physical, sensorial or mental
disabilities, or who lack the experience
or knowledge, unless supervised or
instructed regarding the use of the
device by a person responsible for their
safety.
• Children should be supervised to
ensure they do not play with the device.
• For greater protection, the installation
of a residual current device is
recommended that does not surpass
30mA. Seek advice from your installer.
• If the hair clipper, whilst connected to
the adapter unit, falls into water, do not
attempt to remove it. First disconnect
the cable from the mains outlet.
• Ensure your hands are completely dry
before touching the adapter.
• Do not use the hair clipper if the cutting
blades are damaged!
• In the event of a device fault and/
or malfunction, switch off the device
and do not attempt to fix it. If in
need of repair seek assistance only
from an After Sales Support service
recommended by the manufacturer.
• Unplug the device whenever not in use.
• The hair cutter adapter is used for
charging the appliance battery. You may
use the hair cutter while it is plugged in.
• The hair cutter must not be used in the
bathroom if it is directly connected to
the mains via the adapter, as this is not
a water safety system of any kind.
• The hair cutter may be used in the
bathroom if it is not plugged in. So, if
the appliance is running on its battery,
it can be used in the bathroom, but you
9