Remote Control; Installing & Replacing The Battery - Braun DigiFrame 1081 Mode D'emploi

2. Remote Control

1
BGM – Slideshow with background
music.
Note: you have to make sure the "Music"
is"On"in Photo setup
2 POWER: Switch On/Off.
3 MENU: Press it to enter into the Main Menu.
4 Functional selection button from right to left
cursor
5 OK TO Confirm or Switch Pause /Play Function
in the music mode
6 SETUP: Go directly to Setup mode.
7 VOL +/-: Turn up/down the volume.
8 l Move back to previous music or video file
9 l Move forward to next music or video file
10 ROTATE: Clockwise 90°In the picture pause
mode each time
11 ZOOM: Change magnification 6 times In the
single picture pause mode
12 ll Press it to Play under stop or pause Status;
Press it to Pause on playing Status
13 Functional selection button from the top to
the bottom cursor.
14 Functional selection button from left to right
cursor
15 RETURN: Return to upper page
E N G L I S H
3. Back side
Buttons and left
side of the frame
1. Power
2. UP
3. VOL +/Right
4. Play/Pause/OK
5. VOL -/ Left
6. DOWN
7. MENU
1. SD/MMC/MS CARD
2. Earphone Jack
3. USB
4. MINI USB (optional)
5. DC IN
16 Functional selection button from the bottom
to the top cursor
17 MUTE: Press Mute button to silence the voice
temporarily.
4. Installing & Replacing the Battery
Place the upside of the remote control down, press
down on the ridged area of the battery cover and
pull towards you to remove the tray. Place one
CR2025 lithium button-cell battery on the tray with
the positive "+"side facing you. Reinsert the tray.
1 1