LEITZ 6207 Mode D'emploi page 6

Assembly
The AC adapter comes with two replaceable plug
inserts.
•
Attach the plug insert required for the type of
your mains power socket as shown in figure 1.
•
Make sure that the plug insert engages audibly
and safely.
Charging devices
m
CAUTION!
• Do not use the AC adapter if the plug insert is
loose or damaged.
• Charge your devices in accordance with the
instruction manual of each device. Follow all
safety instructions given there.
• Make sure that the maximum permissible
charge current of 5 A is not exceeded.
1. Connect the AC adapter to the charger. Plug
the AC adapter into a suitable, easily accessible
mains power socket. (See figure 2.)
2. Connect the device you wish to charge to one of
the charging ports on the charger.
For this purpose, use the USB cable that came
with this product or with your device. (See
figure 3.)
Remove the AC adapter from the mains power
socket when charging is completed.
Additional Information
Up-to-date information and/or further details for
use can be obtained from the product description
at http://www.leitz.com/.
6
EN