Specification; Features; Operation; Adjusting The Offset Magazine - Husky DPCN45 Guide D'utilisation Et D'entretien

Specifications
Air consumption : 5.17 SCFM with 100 fasteners
per minute @ 90 psi
Air inlet: 1/4 inch NPT
Magazine capacity: 120 fasteners, 11 gauge
Weight: 5.46 lbs
Maximum pressure: 115 psi
Pressure range: 70 psi – 115 psi
Pin size range: 3/4 inch to 1-3/4 inch
( 3.05mm)
Compatible with generic brands of 15° wire collated
roofing nails.

Features

ONE PIECE DRIVER BLADE
For increased durability.
COMFORT-GRIP HANDLE
For increased comfort and control.
MAGNESIUM BODY
Lightweight tool is great for extended use.
ADJUSTABLE DEPTH
Depth is easily adjustable for various applications.
FIRE LOCK
Prevents accidental firing when the tool is not in use.
TRANSPARENT BUCKET
For monitoring fastener levels.
8

Operation

1

Adjusting the offset magazine

The load feature is designed for quick and easy reloads.
To avoid jamming, always adjust the magazine to the
correct position for the size nails you want to use. There
is an adjustment indicator (B) inside the magazine to help
you choose the right position.
To adjust the magazine, pull up on the spool (C) to the
desired position and then rotate it clockwise to set it.
Rotate it counterclockwise to lower the nail tray (D).
Spool(C)
Position indicator(B)
Nail tray(D)
2

Loading fasteners

Connect the tool to the air source.
Depress the feeder cover latch(E) and open the cover(F).
Open the magazine cover(H).
Slide the coil of nails onto the spool with the nails
pointing down.
Insert the first nail into the feeder(G).
Position the second nail between the guides(I), the nail
heads should lie in the top track.
Close the magazine cover(H).
Securely close the feeder cover(F), snapping it into place.
Be sure that the feeder cover is locked before resuming
operation.
Feeder cover latch(E)
Feeder cover (F)
Feeder (G)
Magazine cover(H)
Guides(I)
Top track
9 HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.