Care; Decleration Of Conformity - REV JY-249 Instructions De Montage Et D'utilisation

Possible cause
Error
• A similar system operates in the immediate
Strange image
surrounding. Select another channel or
change location.
Flickering image
• Strong spot or floodlight in the monitored
area of the camera.
• Set image fixation (5) on the rear side of
the monitor anew
Normal sound,
• System monitor wrongly set
dark or a too
(reset brightness and contrast),
bright image.
• Strong spot or floodlight in the
monitored area of the camera.
• The supply voltage is too low (recharge
Only a white
the accumulator or use mains operation).
image on the
• Monitor is wrongly set (brightness control).
monitor.

Care

!
Always disconnect mains-powered devices before cleaning
(pull out plug).
!
Clean the device with a damp cloth do not use cleaning
agents.

Decleration of Conformity

REV Ritter GmbH hereby declares that the JY-249
(= JY-229TB + JY-249R) model is in accordance with the
underlying requirements and other relevant provisions of
Directive 1999/EC. For the complete CE Declaration of
Conformity please refer to www.rev.biz under the article in
question.
This product is a wireless video monitoring system and may only
be used as such.
23
2,4GHz