The volume can be set by rotating the
brightness (6) contrast (7)
The
,
set by means of the shuttle control on the rear side of the
monitor.
Should the radio transmission be disturbed, you should change
the channel on both the monitor and camera as well. Ensure
that you set the same channel on both the monitor and
camera.
Extras
Image-off switch on the monitor (2)
By turning this switch to "off" position you switch off the video
transmission to the monitor. The audio signal will continue to be
transmitted. If you again turn the switch to "on", the image
appears again on the monitor.
Infrared
The infrared mode will be switched on automatically during
darkness. The infrared mode allows you to operate the camera
even during darkness. Integrated IR LED lightens the
surrounding in the invisible infrared range. In darkness, the
maximum covered range is approx. 2m. In daylight the infrared
mode is switched off automatically.
Audio/video output (9/10)
You can connect a video recorder to the camera through the
output Audio/Video with the help of the supplied A/V cable.
Should your television set have a picture-in-picture function,
you can connect the monitor to the television set in order to
view the monitored area parallel to your television program.
volume control (1)
image fixation (5)
and
are
.
20