Table des Matières
Publicité
headboard bracket installation guide (optional)
STEP 2
Attach the plastic spacer and T-Bracket.
a.) Measure the distance between the mounting holes on the headboard and install the spacer and attachment
plate to accommodate the headboard.
b.) To install the plastic spacer and attachment plate, you will need (2) long bolts and (2) nuts. Place the spacer
and attachment plate in the desired location and slip the bolts through the holes with the head of the bolt
facing outward. Position the bolts diagonally on the spacer. Use the 9/16" (14 mm) socket and wrench to
tighten the bolts.
STEP 3
You may now connect your headboard to the attachment plates using the remaining short bolts and nuts to
secure it to the brackets. The heads of the bolts will face outward. Use a 9/16" (14mm) socket and 1/2" (13mm)
wrench to tighten the bolts.
11
Publicité
Table des Matières
