Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
08 Use of the product / Installation
Before use, check the completeness of the parts supplied and the intactness of
the product. If damaged, it must not be put into operation. This product may
only be installed by a qualified technician.
Installation:
1. Disconnect from the mains.
2. Secure against being switched on again.
3. Verify that there is no voltage to your cable.
4. Follow the enclosed instructions. (fig 1-2.)
Warning: When the LEDs keep glowing, please check if you connected the flood-
light correctly (L/L,
(fig 1.)
(fig 3.)
easy to connect
09 Operating the product
The safety instructions and warnings must be observed to ensure both the per-
fect condition of the product and safe operation.
10 Product maintenance
The driverless floodlight can be cleaned with clear water and a soft cloth. Do not
use detergents containing surface active agents or scouring agents.
30071X-MAN-ML-2017122001-SHA - Complete Book A5.indb 5
/
and N/N) (Fig 3.)
(fig 2.)
≈ 100°
(fig 4.)
A
B
SENS
TIME
Sensor
C
A - detection Distance 8-10m
Detection angle
LUX
B - Work time
C - Twilight sensor
5
X
X
100°
5s - 10m
3-1000 Lux
2017-12-20 13:30:03
Publicité
Chapitres
Table des Matières
