Reverb; Effects - Galileo VP121 Mode D'emploi

owner's manual
REVERB: Selecting or modifying a reverb in a preset
Each of your VP121 sounds can include a reverb effect. The reverb type (Room - Hall 1 - Hall
2 - Stage) selection is indicated by the corresponding led on the panel. Press the reverb button
to change the reverb type.
Stage
Hall 2
Hall 1
Room

Reverb

EFFECTS

Edit the "reverb send" value for a selected preset
It is possible to customize the default reverb level set from the factory. Keep the REVERB
button pressed for two seconds. The current reverb led-light will start flashing and the display
shows the current send level value (from 1 to 10).
Stage
Hall 2
Hall 1
Room
Reverb
EFFECTS
Note: it is possible to change the reverb send for any Sound Preset.
EFFECTS: Selecting or modifying a effects in a preset
EFX: Each of your VP121 sounds can include digital effect (Chorus - Phaser - Tremolo - Delay). The
effect type selection is illustrated by the corresponding led-light on the panel. Press the EFX button
to change the effect.
Delay
Tremolo
Flanger
Chorus
Effect
The preset PIANO1 has the
effect OFF (all led-light are off).
Edit the effect send value for a selected preset
It is possible to customize the default effect level set from the factory. Keep the EFX button
pressed for two seconds. The current effect led-light will start flashing and the display shows
the current send level value (from 1 to 10).
Delay
Tremolo
Flanger
Chorus
Effect
Note: it is possible to change the effect send for any Sound Preset.
Stage
Stage
Hall 2
Hall 2
Hall 1 Hall 1
Room
Room
Reverb
Reverb
EFFECTS
EFFECTS
Delay Delay
Tremolo
Tremolo
Flanger Flanger
Chorus
Chorus
Effect
Effect
Stage
Hall 2
Reverb OFF
Hall 1
(all leds off).
Room
Reverb
EFFECTS
decrease value
To modify the value press the DATA button.
Delay
Tremolo
Flanger Effects OFF (all
Chorus
led-light off).
Effect
decrease value
To modify the value press the DATA button.
VP121
Stage
Hall 2
Hall 1
Room
Reverb
EFFECTS
increase value
Delay
Tremolo
Flanger
Chorus
Effect
increase value
EN 6