Metronome Parameters Editing; Tempo; Transpose - Galileo VP121 Mode D'emploi

owner's manual
Change the Split point:
To change the Split Point Press and hold the Bass button
down for two seconds, the display shows the current Split
Point. Play the note on your piano (or use the DATA buttons)
to assign a new split point. Press both of the DATA buttons
at the same time to return to the default split-point C2.
Press the Bass button again to exit from editing.
METRONOME: playing with a metronome guide
Press the METRONOME button to enable the metronome feature. The button led-light starts flashing
while the display will show the current metronome value (speed). The metronome value has a
default preset of 120 BPM (beats-per-minute) and can be changed in a range from 30 to 250 BPM.

Metronome parameters editing

By holding the METRONOME button for more than 2 seconds,
the piano will enter the metronome editing menu. The display
shows the first parameter: TIME SIGNATURE.
Using the TEMPO/DATA button you can set the meter you desire
(1/4 - 2/4 – 3/4 - 4/4 – 5/4 – 6/4 – 7/8 – 3/8 – 6/8 – 7/8 – 9/
8 – 128) .
press the METRONOME button to exit.

TEMPO

You can change the Tempo value
(beats-per-minute) in a range from 30
to 250 (default 120), using the TEM-
PO/DATA button.
To recall your piano's default value (120 bpm) press
TEMPO/DATA buttons at the same time.

TRANSPOSE

Your piano can be transposed by +/-12 semitones. Press and hold the
TRANSPOSE buttons on the control panel for more than 2 seconds - the
corresponding led blinks.
Press the TEMPO/DATA buttons to change the current value.
The first time you press the buttons the display will show the current value
(default=0, C=C). The next time you press the buttons the value will be
modified.
Press the TRANSPOSE button to exit the transpose edit status. The button
led stops flashing but remains ON, to show the current transposed status of
the piano.
Press the TRANSPOSE button again, to quit the transpose, restoring your
piano to normal/default mode.
METRONOME
TEMPO/DATA
decrease value
Use the TEMPO/DATA buttons to
change the current beat value.
Press the METRONOME button a second
time to turn off the metronome.
increase value
TEMPO/DATA
VP121
METRONOME
TEMPO/DATA
default 120bpm
EN 5